TREND 7 Wall paint
A matt, water-borne dispersion paint containing acrylate, for indoor use.
The product has been classified to Group M1 in Emission Classification of building materials.
The paint is suitable for use on new and previously painted interior walls and ceilings made of concrete, plaster, stopper, brick or building board when a matt and hard-wearing surface is required.
Not to be used on doors, windows and furniture.
| Technical Data | |
|---|---|
Solids | About 38 % by volume |
Volatile organic compound (VOC) | EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l. |
Practical spreading rate | Previously painted surface Filler and wood fibre board Concrete and plastered surface 7 - 10 m²/l 5 - 8 m²/l 4 - 7 m²/l |
Density | abt. 1.3 g/ml |
Drying time at +23 °C / 50 % RH - dust free - overcoatable | after ½ h after 1 h The drying will be slowed down if the air is cool and/or humid. |
Thinner, clean up | Water. Wash the equipment immediately after use with water. |
Finish | Matt |
Colours | Base paints 1 and 3, which can be tinted to obtain the shades in Interior Colour Cards. Off-white T1327 (TC-8168) |
Washability and wear resistance | Wear resistance of the painted surface is good. Wet scrub resistance, class 2 according to EN 13300 (ISO 11998). Lasts over 5 000 brushings, SFS 3755. |
Packages (availability varies by country) | Base paint 1: 0,9 L, 2,7 L, 9 L, 18 L Base paint 3: 0,9 L, 2,7 L, 9 L, 18 L Off-white T1327 (TC-8168): 18 L |
SAFETY MARKINGS | See Safety Data Sheet. |
| Direction for Use | |
|---|---|
Surface preparation | Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed. |
Priming | Steel surfaces are primed with FERREX AQUA Anticorrosive paint. Paint galvanized surfaces with TREND 7. Paint other surfaces with TREND 7 or prime with TREND 3. |
Application | Before use stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray. |
Application conditions | The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5 °C and the relative air humidity below 80 %. Good ventilation during the application and drying period quickens the drying process. |
Maintenance instructions | The final forming of the paint film takes abt. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the painted surface must be treated with care. The painted surface can be cleaned by light wiping. Use a damp cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion. |
Storage | Must not freeze. |
Technical Data Sheet
Product Image (Hi-Res)