Solids

About 35 % by volume

Volatile organic compound (VOC)

The product is not included in the EU VOC directive.

Practical spreading rate

Density

abt. 0.85 g/ml

Drying time, +23 °C

- touch dry

- dry

after 8 hours

after 16 hours

The drying process will be slower in cold and/or damp.

Thinner, clean up

To be used without thinning. The equipment is washed immediately after use with TEKNOSOLV 1621 (solvent naphtha).

Finish

Is absorbed into the wood and does not usually form any visible film.

Colours

Brown and in spray can also clear

Weather resistance

For surfaces that are continuously exposed to weathering a renewed treatment is necessary once a year.

Packages (availability varies by country)

Brown: 0,5 L, 1 L and 500 ml spray

Clear: 500 ml spray

SAFETY MARKINGS

See Safety Data Sheet.

NOTE! Because of the danger of self-ignition, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers. Immersion in water is also recommended.

Surface preparation

Remove from the surface all loose matter, dirt and dust. Use RENSA TERRACE deck cleaner on surfaces to be treated, when needed. Rinse the surfaces thoroughly with water and allow to dry.

Remove old paint or varnish layers before the treatment.

Application

Before use stir the product thoroughly.

Stir well before application. Apply WOODEX HARDWOOD OIL by brush or sponge. Dipping can also be used.

Renew the treatment according to the quality of wood until the surface doesn´t absorb more oil. Wipe off possible excess oil abt. 30 min after the application.

Application conditions

The surface to be treated must be dry. The relative moisture of the wood must be below 20 % of the weight of the wood.

During the application and drying period the temperature of the ambient air, the surface and the product shall be above +10 °C and the relative air humidity below 80 %.