TIMANTTI CLEAN Antimicrobial interior paint
A semi-matt water-borne acrylate paint which improves the hygiene level in rooms. The active ingredient is silver. The antimicrobial effect remains throughout the life of the paint film.
The antimicrobial efficiency has been tested according to standard ISO 22196.
Group M1 in Emission Classification of building materials.
The product has been granted the right to use the allergy label of the Finnish Allergy and Asthma Federation.
For indoor use in spaces where wall and ceiling surfaces must be easy to clean and resistant to abrasion. Recommended objects, where antimicrobial properties of the paint film improve the functionality of the spaces, are hospitals, health centres and other public health premises, nursing homes, kindergartens, schools and other public spaces, as well as e.g. food industry spaces.
TIMANTTI CLEAN can be applied to primed concrete, plaster, stopper, brick and building board surfaces according to the instructions. TIMANTTI CLEAN is also suitable for repainting old alkyd and dispersion paint coats.s.
| Technical Data | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Antimicrobial properties | The active ingredient resists efficiently e.g. following types of microbes:
| ||||||||||
Solids |
Abt. 36 % by volume | ||||||||||
Volatile organic compound (VOC) | EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l. | ||||||||||
Practical spreading rate | 6 - 8 m²/l | ||||||||||
Density | abt. 1.3 g/ml | ||||||||||
Drying time +23 °C, the relative air humidity 50 % - dust free - overcoatable | after 1 hour after 3 hours The drying process will be slower in cold and/or damp. The product obtains the final hardness and durability in normal conditions after about 1 month. | ||||||||||
Thinner, clean up | Water. Wash the equipment immediately after use with detergent and warm water. | ||||||||||
Finish | Semi-matt | ||||||||||
Colours | Base paints 1 and 3, which can be tinted to obtain the shades in Interior and Exterior Colour Cards. | ||||||||||
Washability and wear resistance | Wear resistance of the painted surface is very good. The painted surface can be washed repeatedly. Wet scrub resistance, class 1 according to EN 13300 (ISO 11998). | ||||||||||
Packages (availability varies by country) | 2,7 L, 9 L, 18 L | ||||||||||
SAFETY MARKINGS | See Safety Data Sheet. | ||||||||||
| Direction for Use | |
|---|---|
Surface preparation | Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable stopper from the TEKNOSPRO series. The dried stopper is sanded down and the dust removed. |
Priming | HUMID AREAS AND WET ROOMS: Prime concrete, plaster, stopper, brick, and building board surfaces with TIMANTTI W moisture sealer. IN DRY AREAS prime the surfaces previously mentioned with TIMANTTI 3 Primer. Steel surfaces are primed with FERREX AQUA Anticorrosive paint. Prime galvanized surfaces with TIMANTTI 3 Primer. |
Application | Before use stir the paint thoroughly. Apply TIMANTTI CLEAN once or twice by roller, spray or brush. Recommended nozzle size for airless spray is 0.017 - 0.021". |
Application conditions | The surface to be painted must be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +10 °C and the relative air humidity below 80 %. Good ventilation during the application and drying period quickens the drying process. |
Maintenance instructions | The final forming of the paint film takes abt. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the painted surface must be treated with care. The painted surface can be cleaned by wiping with a neutral (pH 6 - 8) detergent. For very dirty surfaces can also alkalescent (pH 8 - 10) detergents be used. Detergent and dirt are removed by wiping and/or rinsing the surface with clean water. Use a cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion. Follow the dilution and other instructions of the detergent producer when using detergents. |
Storage | Must not freeze. |
Technical Data Sheet
Product Image (Hi-Res)