SILOKSAN GEL
Water-borne gel containing polysiloxane for use together with SILOKSAN FACADE Silicone Emulsion Paint on mineral surfaces (the SILOKSAN method).
Saves from 1-3 separate primings and saves thus also application costs.
Will improve the water-repellent qualities of the substrate by preventing rain and splash water from penetrating into the structures. Allows water vapour from the structure to penetrate. Diminishes seepage of salts to the surface of the structure.
The product has CE approval for protection of concrete structures.
| Technical Data | |
|---|---|
Solids | About 80 % by volume |
Volatile organic compound (VOC) | EU VOC limit value (kat A/h): 30 g/l 2010. The product´s VOC: max. 30 g/l. |
Density | 0.9 g/ml |
Drying time at +23 °C / 50 % RH - touch dry Overcoatable | after 1 hour after 2 - 3 hours |
Thinner, clean up | Water |
Packages (availability varies by country) | 1 L |
| Direction for Use | |
|---|---|
Pretreatments | See label or data sheet of SILOKSAN FACADE Silicone Emulsion Paint. |
Application | Mix with SILOKSAN FACADE Silicone Emulsion Paint before painting, in the ratio 9 l paint to 1 l gel. Stir by e.g. drilling machine for a minimum of 5 minutes. The application is done according to instructions given for SILOKSAN FACADE Silicone Emulsion Paint. NOTE! The ready mixed paint must be used within the same working day (<18 h). The paint can be used after this time, but the water-repellent properties will be weakened and are then approximately the same as for the top coat. |
Application conditions | The temperature shall be above +5 °C and the relative air humidity below 80 %. |
STORAGE | Must not freeze. The storage temperature must be below +30 °C. |
| CE information | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CE MARKING |
| ||||||||||||||||||
Technical Data Sheet
Product Image (Hi-Res)
Declaration of Performance