TELA TAUSTAMUSTA A full-matt, water-borne acrylate paint
A full-matt, water-borne acrylate paint for interior painting.
The paint is suitable for new and previously painted surfaces of wood, concrete, plaster, stopper, brick and building boards whenever a black surface with full-matt finish is desired. The paint is especially well suited for painting the structures behind lowered lattice ceilings.
| Technical Data | |
|---|---|
Solids | About 31 % by volume |
Volatile organic compound (VOC) | EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l. |
Practical spreading rate | Previously painted surface Filler and wood fibre board Concrete and plastered surface 7 - 10 m²/l 5 - 8 m²/l 4 - 7 m²/l |
Density | abt. 1.5 g/ml |
Drying time +23 °C, the relative air humidity 50 % - dust free - overcoatable | after ½ hour after 2 hours The drying will be slowed down if the air is cool and/or humid. |
Thinner, clean up | Water. Wash the equipment immediately after use with water. |
Finish | Full-matt |
Colours | Black |
Washability and wear resistance | The painted surface resists slight mechanical wear. Wet scrub resistance, class 3 according to EN 13300 (ISO 11998). |
Packages (availability varies by country) | 9 L, 18 L |
SAFETY MARKINGS | See Safety Data Sheet. |
| Direction for Use | |
|---|---|
Surface preparation | Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed. Steel surfaces are primed with FERREX AQUA Anticorrosive paint. |
Application | Before use stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray. |
Application conditions | The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5 °C and the relative air humidity below 80 %. Good ventilation during the application and drying period quickens the drying process. |
Storage | Must not freeze. |
Technical Data Sheet
Product Image (Hi-Res)