Teknos tuotteet

Teknoksen offline-tuotetietokirjasto

  • Jälleenmyyjien käyttöön sävytyskoneille Teknoksen tuotetiedot helppokäyttöisessä muodossa.

PELTIPESU Washing agent for galvanized surfaces

   

PELTIPESU is a concentrated alkaline cleaning agent containing ammonia. Dilute with water before use.

Galvanized surfaces can be cleaned from zinc salts, grease, dirt and other contaminants by washing with PELTIPESU cleaning agent followed by careful rinsing with fresh water. The product is also suitable for general cleaning of paint coats before rinsing and repainting.

Technical Data

Density: about 1 g/ml pH: about 12

pH: about 12

Practical spreading rate: abt. 15 m²/liter with diluted cleaning agent. (Dilution 1:3 with water. 1 liter of undiluted cleaning agent lasts for abt. 60 m².)

Colour: blue

Packages (availability varies by country)

1 L, 5 L, 10 L
Direction for Use

Dilute PELTIPESU before use by mixing 1 part cleaning agent to 3 parts water.

Brush severely corroded areas with care before washing.

Remove poorly adherent paint from previously painted surfaces by scraping or with a paint removing agent.

Pour out the agent over the surface to be cleaned and brush with care. NOTE! Cleaning agent must not dry onto the surface to be painted.

Rinse thoroughly with clean water and let the surface dry before paint is applied.

Storage

Must not freeze.

The information of this data sheet is based on laboratory tests and practical experience. The figures are for guidance only and depend on, for example, colour and gloss. As we have no control over the use and application conditions, we are only responsible for the quality of the product and guarantee that it conforms to our quality control. We accept no liability for any loss or damage resulting from the application of the product contrary to the directions or the intended use. The latest versions of our data sheets, material safety data sheets and system sheets are on our home pages www.teknos.com.