PANELWAX
PANELWAX is a water-borne transparent wax containing natural wax for interior wood surfaces.
PANELWAX is suitable to use on wood surfaces in dry interior spaces, e.g. for ceiling and wall panels and also for skirting and doors
PANELWAX gives a water-repellent surface that is easy to clean.
| Technical Data | |
|---|---|
Solids | About 37 % by volume |
Volatile organic compound (VOC) | EU VOC limit value (kat A/e): 130 g/l 2010. The product´s VOC: max. 130 g/l. |
Practical spreading rate | 8 - 14 m²/l on one application. |
Density | abt. 1.0 g/ml |
Drying time at +23 °C / 50 % RH - dust free - recoatable | after 2 hours the following day After about a week the treated surface can be lightly polished, e.g. with a cloth. |
Clean up | Clean the equipment immediately after use with warm water and detergent. |
Finish | Matt |
Colours | Clear, transparent. The product is included in the Teknomix tinting system. |
| Direction for Use | |
|---|---|
Surface preparation Application | Remove the old varnish and paint coats completely and also grease and dirt. Mix the wax carefully down to the bottom of the can by stirring. Apply with stiff brush, sponge or with flint-free cloth parallel with wood grain. In darker shades the best result is achieved by sponge or cloth. If needed the application can be repeated on the next day. Before the repeated application sand down lightly the raised wood fibres. On level surfaces and other surfaces prone to strain it is recommended several applications, e.g. 1 colour + 1-2 colourless. |
Application conditions | The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the wax shall be above +10 °C and the relative air humidity below 80 %. |
Storage | Must not freeze. |
Technical Data Sheet
Product Image (Hi-Res)