Teknos tuotteet

Teknoksen offline-tuotetietokirjasto

  • Jälleenmyyjien käyttöön sävytyskoneille Teknoksen tuotetiedot helppokäyttöisessä muodossa.

RENSA Paint Washing Liquid

    

Alkalic washing agent for cleaning of painted surfaces and surfaces that are to be painted.

The washing liquid is suitable for cleaning unpainted and painted surfaces from dirt, grease and oil. Can be used on e.g. wooden, metal, concrete and plastic surfaces.

Hard and glossy surfaces are first to be washed with RENSA Paint Washing Liquid, whereafter the surfaces are sanded and the dust is removed.

The liquid can also be used for cleaning of brushes etc.

Technical Data

Contents
Chemical nameINCI-nameCAS-no.Concentration
wateraqua7732-18-5>10 %
sodium metasilicatesodium metasilicate, pentahydrate10213-79-31-10 %
sodium gluconatesodium gluconate527-07-11-10 %
2-propenoic acid2-propenoic acid66019-18-91-10 %
ethanolalcohol64-17-51-10 %
alcohol ethoxylateC9-11 pareth-468439-46-31-10 %
sodium N-(2-carboxyethyl)- N-(2-ethylhexyl)- -alaninate-94441-92-61-10 %
isopropanolisopropyl alcohol67-63-01-10 %
alcohol ethoxylate / propoxylate--1-10 %
sodium hydroxidesodium hydroxide1310-73-21-10 %
propan-1-olpropyl alcohol71-23-80,1-1 %
butan-2-ol2-butyl alcohol78-92-20,1-1 %

Density

1.08 g/ml

Thinner

Water

pH

As solution about 10.5, as concentration 12.5.

SAFETY MARKINGS

See Material Safety Data Sheet.
Direction for Use

RENSA Paint Washing Liquid is diluted with water:

cleaning prior to painting 1:10 general cleaning of painted surfaces 1:20 removal of old wallpaper 1:10 - 15 washing of painting equipment 1:10 for very dirty, hard or glossy surfaces 100 % solution Test the effect of the washing liquid first on a small area of the surface to be cleaned. The solution may matten the surface.

After the cleaning, sand hard and glossy surfaces before they are painted, to improve the adhesion.

Apply by e.g. brush or sponge. Use protective gloves and glasses when using undiluted washing liquid.

Leave the solution on the surface for 2-10 minutes, or longer. Longer time and the use of warm water improves the cleaning effect.

Finally, rinse the surfaces with water to remove all dirt and washing liquid.

STORAGE

MUST NOT FREEZE.

The information of this data sheet is based on laboratory tests and practical experience. The figures are for guidance only and depend on, for example, colour and gloss. As we have no control over the use and application conditions, we are only responsible for the quality of the product and guarantee that it conforms to our quality control. We accept no liability for any loss or damage resulting from the application of the product contrary to the directions or the intended use. The latest versions of our data sheets, material safety data sheets and system sheets are on our home pages www.teknos.com.