Solids

About 59 % by volume

Layer thickness

0 - 2 mm

Volatile organic compound (VOC)

The product is not included in the EU VOC directive.

Practical spreading rate

0,5 l/m² with layer thickness 0,5 mm.

Particle size

Max. 0.03 mm

Density

1.8 g/ml

Drying time +23 °C, the relative air humidity 50 %

1-2 hours/mm depending on layer thickness

The drying process will be slower in cold and/or damp.

Clean up

Water

Colours

White

Packages (availability varies by country)

0,19 L, 0,5 L, 3 L

SAFETY MARKINGS

See Safety Data Sheet.

Surface preparation

Clean new surfaces from dust and dirt.

Wash previously painted surfaces with RENSA SUPER paint cleaner.

Matt down hard or gloss surfaces by sanding and thereafter remove the dust.

Brittle substrates and untreated wooden and metal surfaces must be primed before the filler is applied.

Application method

Apply the filler with a trowel. The number of layers is dependent on the surface roughness.

The dried filler can be painted or wall-papered. Before wall-papering the filler surfaces must be primed with adhesive. The use of protective mask for eyes and face is recommended when sanding the filler.

Application conditions

The surface to be treated must be dry.

The temperature of the air, the surface and the filler shall be above +5 °C and the relative humidity of the air below 80 % during the time of application and drying.

Storage

To be stored in a cool place. Must not freeze. Storage stability is 1 year in unopened package.

CE MARKING