Solids

About 53 % by volume

Layer thickness

0 - 5 mm

Volatile organic compound (VOC)

The product is not included in the EU VOC directive.

Practical spreading rate

For skimming the entire surface, 1 l/m² with 1 mm layer thickness. For partial filling of surfaces and filling of joints, two layers on gypsum board, abt. 0,3 l/m².

Particle size

Max. 0.3 mm

Density

1.8 g/ml

Drying time +23 °C, the relative air humidity 50 %

2 - 3 hours/mm depending on the layer thickness.

The drying process will be slower in cold and/or damp.

Clean up

Water

Colours

White

Packages (availability varies by country)

15 L

SAFETY MARKINGS

See Safety Data Sheet.

Surface preparation

Clean new surfaces from dust and dirt.

Wash previously painted surfaces with RENSA SUPER paint cleaner.

Matt down hard or gloss surfaces by sanding and thereafter remove the dust.

Brittle surfaces and untreated wooden surfaces must be primed before the filler is applied.

Application method

Tasoite levitetään tasoiteruiskulla. Suurpaineruiskulla ruiskutettaessa suositeltava suutinkoko on 0,039 - 0,045". Käsittelykertojen määrään vaikuttaa pinnan epätasaisuus.

Kuivunut tasoite voidaan maalata tai tapetoida. Ennen tapetointia tasoitepinnat on esiliimattava. Tasoitetta hiottaessa suositellaan käytettäväksi silmäsuojusta ja hengityssuojainta.

Application conditions

The surface to be treated must be dry.

The temperature of the air, the surface and the filler shall be above +5 °C and the relative humidity of the air below 80 % during the time of application and drying.

Storage

To be stored in a cool place. Must not freeze. Storage stability is 1 year in unopened package.

CE MARKING