Teknos tuotteet

It meets the requirements by OECD and by the Detergent regulation of European Parliament and the Council on detergents for biodegradability of all used raw material (OECD 301B, EC 648 / 2004).


pH	abt. 11
Dilution	For normal maintenance cleaning of sauna: 1 : 10 (1 litre of detergent to 10 litres of water) For pre-treatment before using protection for sauna or sauna wax: 1 : 5
Spreading rate	abt. 40 m² / 1 l undiluted detergent. Absorption of the surface, dirtiness, air humidity etc. factors affect considerably on the spreading rate.
Ingredients of RENSA SAUNA detergent	INCI name Aqua Phosphoric acid, monodecyl ester, potassium salt Trideceth-4 Potassium carbonate Trisodium dicarboxymethyl alaninate Lauramine oxide CAS 7732-18-5 68427-32-7 69011-36-5 584-08-7 164462-16-2 308062-28-4 If needed, please contact sds@teknos.fi for the full ingredient data sheet.
Packages (availability varies by country)	1 L
SAFETY MARKINGS	See Safety Data Sheet.


	Dilute RENSA SAUNA with water depending on the purpose of its use: For normal maintenance cleaning of sauna: 1 : 10 (1 litre of detergent to 10 litres of water) For pre-treatment before using protection for sauna or sauna wax, varnishing or painting: 1 : 5 Wet the surface to be cleaned with water before applying the detergent. This prevents the detergent from absorving too much e.g. into wooden surfaces and drying too fast. Apply the detergent to the surface to be cleaned by using e.g. a brush, sponge or low-pressure spray (so-called garden spray). Let it act for abt. 10 minutes. Enhance the cleaning effect by brushing. The detergent must not dry on the surface to be cleaned - wet the surface again with the washing fluid, if needed. Rinse the surface thoroughly with clean water.
Protection	RENSA SAUNA is an efficient, but user-friendly, environmentally friendly and also biodegradable product. However, using the detergent must be followed with a reasonable caution. Avoid skin contact and breathing the spray mist. Protect eyes from splashes. More information from product's Material Safety Data Sheet. The detergent does not harm the surfaces to be cleaned, but avoid unnecessary splashing. For the most delicate materials, e.g. textile surfaces, must be ensured efficient protection and suitability of the product by testing the effects on a small, unnoticeable area of the surface to be treated.
ADDITIONAL INFORMATION	MUST NOT FREEZE.

Dilute RENSA SAUNA with water depending on the purpose of its use:

For normal maintenance cleaning of sauna: 1 : 10 (1 litre of detergent to 10 litres of water)

For pre-treatment before using protection for sauna or sauna wax, varnishing or painting: 1 : 5

Wet the surface to be cleaned with water before applying the detergent. This prevents the detergent from absorving too much e.g. into wooden surfaces and drying too fast.

Apply the detergent to the surface to be cleaned by using e.g. a brush, sponge or low-pressure spray (so-called garden spray). Let it act for abt. 10 minutes. Enhance the cleaning effect by brushing. The detergent must not dry on the surface to be cleaned - wet the surface again with the washing fluid, if needed.

Rinse the surface thoroughly with clean water.

Protection

RENSA SAUNA is an efficient, but user-friendly, environmentally friendly and also biodegradable product.

However, using the detergent must be followed with a reasonable caution.

Avoid skin contact and breathing the spray mist. Protect eyes from splashes.

More information from product's Material Safety Data Sheet.

The detergent does not harm the surfaces to be cleaned, but avoid unnecessary splashing. For the most delicate materials, e.g. textile surfaces, must be ensured efficient protection and suitability of the product by testing the effects on a small, unnoticeable area of the surface to be treated.

ADDITIONAL INFORMATION

MUST NOT FREEZE.

Lisää tuotteesta

Tuoteseloste